⚪︎ RB67 PRO S Body ⚪︎ Lens: MAMIYA-SEKOR 127mm F3.6 ⚪︎ 120 Roll Film Holders - 2 ⚪︎ Waist Level Finder ⚪︎ Rubber Hoods - 2 ⚪︎ Technical Hood & 77mm Ring This item was used in a photo studio and stored indoors for over a decade. The condition is as shown in the photos. There are some scratches and wear due to age. The lens appears to be in relatively good condition, with almost no dust or debris. The lens cap has been lost, so a Canon lens cap will be included. The light seals on the holders were deteriorated, so I removed the stickiness, cleaned them, and replaced them using a dedicated light seal replacement kit (I haven't replaced the light seals on the camera body itself as they still seem to be in good condition). I recommend further maintenance if desired. In terms of operability, there are no particular issues such as stiffness or slippage. I have confirmed basic functions such as the shutter firing, focusing, and strobe synchronization, but I have not tested with film, nor have I performed shooting, developing, or printing. This is a durable, fully mechanical medium format camera that can be used without batteries. This is a used item that has been stored for a long time. Please consider this item with the assumption that maintenance may be required. I will carefully package and ship the item.