【Please Read Everything Carefully】 ▪️Unused 4-channel NVR with built-in POE power supply function (Supplies power to each camera via LAN cable from the recorder because the POE function is built-in) Motion detection function, please take a close look at the photos. ▪️POE compatible IP camera, 1 megapixel, 3 new units (with infrared night vision function, also supports DC power supply → red adapter) ▪️Includes 2TB HDD The HDD status, checked with CrystalDisk, is shown in the photos. This is a sample product purchased around 2018 and stored at the company. There should have been another camera, but it couldn't be found, so I'm selling it with 3 cameras. This DVR is an NVR specifically for IP cameras with POE output function. Analog cameras cannot be used. Installation is very easy, just connect the recorder and cameras with LAN cables. This alone supplies power to the cameras and automatically recognizes the images. I have confirmed the operation at the time of listing. Although it is a sample product and almost unused, there is some deterioration due to aging. Please purchase this product only if you have knowledge of installing and setting up security cameras, or if you can research it yourself. I cannot provide instructions on how to use it. 【Contents】 ⚫︎4ch NVR with POE output function × 1 Japanese display, NTSC, supports simultaneous recording of 4 IP cameras Maximum resolution of supported cameras: 960P Video output via HDMI and VGA (can be output to a TV, etc.) ⚫︎2TB HDD built-in ⚫︎AC/DC adapter 15V × 1 (new, PSE compliant) ⚫︎1 megapixel IP camera × 3 ⚫︎LAN cable for camera × 4 ※The lengths vary as shown in the photos. I have confirmed that power supply and image communication via POE are possible with these LAN cables. ⚫︎Included CD, mouse Just in case, I replaced the button battery on the motherboard with a new one when I installed the HDD this time.