Free Shipping Installation Kit Toyota TOYOTA Daihatsu DAIHATSU Navigation/Audio Harness 10P (pin)/6P Connector Harness Wiring This is a 10-pin and 6-pin wiring harness for TOYOTA and DAIHATSU vehicles. This part is essential when replacing the factory deck (CD/MD, etc.) or factory navigation system with an aftermarket deck (such as Carrozzeria, Kenwood, Alpine, Clarion, etc.). It is used to convert the original wiring. Power Split Wiring Conversion Harness As shown in the photo, the red wire (accessory power) and the yellow wire (main power: battery "+"), and the antenna control wire (blue) are divided into two. For additional monitors, additional gauges (boost gauge, vacuum gauge, exhaust gas temperature gauge, water temperature gauge, oil temperature gauge, oil pressure gauge, voltmeter, etc.), boost controllers, ETC, drive recorders, and other electrical components, you will always need to obtain new accessory and + power. You can definitely get power from here, and disassembling the deck is a relatively easy task. This is a convenient wiring harness that eliminates the need for wiring splits from the above. Power Takeout Free shipping nationwide With tracking number Removed from a working vehicle. The wiring is sticky. There is no problem with use. Will be shipped without packaging. Some compatible models are listed below (different shapes may apply depending on the year) If you are unsure of compatibility, please provide the vehicle model, year, and model code, as we can also investigate. Prius PHV Aqua Roomy Granvia Funcargo Nadia Wish Avensis Vanguard Vitz Calldina Camry Noah Ractis Succeed Spade Allex Passo Porte Sprinter Harrier Land Cruiser Corolla Fielder Prius SAI Soarer Probox C-HR Ist Estima Hilux Cami Mark X Regius Alphard Pixis FJ Cruiser RAV4 MR-S 86 BRZ Ist Daihatsu MAX Atrai Opti Move Altis Boon Hijet Mira Thor Copen Coo Storia Sonica Terios Midget Tanto YRV Wake Mebius Naked Bego Subaru DEX