Shizuku Life-size Air Vinyl Air POP Air Cushion ⭐️ This is a life-size vinyl product that inflates with air. The second image is an inflated image. The illustration in the first image becomes three-dimensional like the second image. You can stand up your favorite character. It can also be used as a body pillow. Double-sided printing with two different designs on the front and back. ⭐️ The illustrations seem to be the same as those used for body pillows. Probably, but not certain (because it's unopened). Brand new, unopened, and stored. Selling a large number of items to declutter. Discounts available for bulk purchases. Body pillow covers, air vinyl, tapestries, anything is okay to combine. I think it can also be used as a body pillow, so please consider it as a companion for your room. If you have no questions, you can purchase it directly. The following is an explanation. Height: Approximately 160cm Made of PVC, UV printed, water-filled base type By putting water in the bottom, it becomes a tumbler. 1. Inflate with air through the air inlet. Insert air from the air inlet on the punching bottom. Stop once when it's about 70% inflated. If you inflate it too much here, it will be difficult to put water in the water inlet. 2. Fill with water from the water inlet at the bottom. You can pour water directly from a plastic bottle. In that case, open the cap and use a funnel to slowly pour in the water. 3. Finally, inflate with air again. Be careful not to over-inflate, as this may cause it to burst or leak air. Secret