This is a self-made wakasagi hook remover made from SUS304 material. The clip is also SUS304. It has a high-class feel because it's been processed with a hairline finish. The set includes the wakasagi hook remover (as shown in the first image), two bolts, a clip, and spare double-sided tape. If you don't need a clip or need multiple clips, please comment. I will create a dedicated page for you. Without a clip, it's 400 yen off, and there's a discount for the second one and beyond. The feature is that the opening of the live well has been shortened to make it wider. Also, the top surface of the live well is flat, so lines are less likely to get tangled. It's made entirely of stainless steel, so it won't rust. It was made to fit the Daiwa Crystia Wakasagi live well. It can also be attached by drilling holes or clamping it to a hard case. Each one is handmade, so there are individual differences. Please understand. The gap in the slit is about 1.5 mm, but you can adjust the gap slightly by tapping or widening it with something that won't scratch it. Since this is where the line passes through, it has been rounded by hand, so please be careful not to scratch it. Since this is a personally made item, there may be scratches and weld burns, so the product condition is set to "slightly scratched or dirty." There are scratches on the back. M4 x 12 bolts are included, but if the length is insufficient or too long, please prepare them yourself. This is a personally made item, so it does not guarantee that it will make it easier to remove wakasagi or increase your catch. Regarding use, I will not accept any claims or returns for issues such as lines or hooks getting caught, or difficulty removing wakasagi. Please purchase only if you understand and agree. If you are interested, please leave a comment.