Privacy and terms of service
Super Famicom
(JP¥7,500)
Text are automatically translated.
Report translation issueFraud prevention
Customer support
Refund support for customers
Item condition
Some scratches/marks
Brand
Super Famicom
Ships from
Japan
Category
Something went wrong, please try again later.
This item can't be bundled due to shipping restrictions. Please buy separately.
Something went wrong, please try again later.
This item can't be bundled due to shipping restrictions. Please buy separately.
Original Model This product is for those who are put off by the yellowed appearance. It has undergone Retrobrite (bleaching) to remove as much yellowing as possible. I myself dislike yellowing and decided to offer this product to those with the same concern. In the event of initial operational defects, we will sincerely accept returns. Please purchase with confidence. ■ Contents (as shown in the first photo) ・ Super Famicom console (bleached) (capacitor replaced) (disassembled and cleaned) ・ Controller x 2 (bleached) (disassembled and cleaned) ・ AV cable ・ AC adapter The price is slightly higher than others, but please understand that we have put in the cost and effort for cleaning, bleaching (which is the most expensive), and parts replacement (capacitors, fuses, plating) to improve the condition before listing. m(_ _)m The cartridge slot is disassembled from the board, and the terminals inside are individually removed and wiped with anhydrous ethanol. The slot is then stripped of old plating and rust, plated, and the terminals are carefully inserted back into the slot one by one and attached to the board. This is very time-consuming. (Photo 3) ① Disassembled and cleaned (Photo 5) ② Capacitors with poor values replaced (Photo 6) Capacitors are consumables. Over time, some may leak. When leakage occurs, the screen may become dark or roll up and down. Replacing the capacitors will fix this. This happens with all Super Famicoms, so if you are buying one, choosing a capacitor-replaced product will make it last longer. The board is washed with an alkaline detergent and dried, and after the capacitors are replaced, it is wiped with flux cleaner and coated with a rust inhibitor. ③ Operation confirmed (Photo 7) ④ Retrobrite (Photo 8) ⑤ The silicone pads of the controllers have been replaced, but those that are not torn are used as is. (Photo 9) ⑥ Fuses have been replaced, but those that are not blown are used as is. (Photo 10) If you only want the console (6000 yen), please comment. We also handle software. We don't have rare software, but we have common software. Please ask questions in the comments. #RetrobriteNeko'sListingList #NekoLateAPU #Neko1chip01 #Neko1chip02 #Neko1chip03 #NekoStore3 #Neko3
18 hours ago