This is an imported car camera. At night, the LED lights up due to the sensor, providing a bright image. Cutting the white loop wire that appears in the middle of the wiring in photo 2 will create a mirror image, allowing it to be used as a backup camera or side camera. If not cut, it will be a normal image and function as a front camera. Cutting the green loop wire will display parking guide lines. A monitor is not included, but a general-purpose monitor can be used. The yellow pin connector is the video cable, so connect it to the monitor. This extension cable for connection is used but will be included as a bonus. (It was not originally included.) Also, the power positive and negative pin jack wiring to connect to the red connector is used but will be included. The white and black line is positive, and connect it to the car's ACC power. The black wire is for body grounding. The camera rotates, and the vertical angle can also be slightly adjusted. Please adjust and install it according to your installation position. Installation is done with double-sided tape. I am using the same type as a side camera, and it is easy to see. I am selling this camera because I have a spare one that I was going to install. Please comment if you have any questions.