This is a completed 1/32 Imaginary Skeleton Tyrannosaurus Rex model made by Bandai. 【Condition】 ⚫︎ Completed without panel lining or topcoat. ⚫︎ As far as I can tell, there are no broken or whitened parts. ⚫︎ Instruction manual and explanatory notes are included. ⚫︎ Gate marks on clear parts have only been trimmed with a design knife (no sanding to minimize clouding of the clear parts). ⚫︎ For gate marks on parts other than clear parts that are visible on the surface, I have used a design knife, 400-grit, 800-grit, and 1200-grit sandpaper. ⚫︎ For parts where the gate marks are not visible on the surface, I have used nippers to cut the parts and then trimmed them with a design knife. I have tried to make the gate marks inconspicuous on all parts, but there may be some areas where they are slightly noticeable. Thank you for your understanding. 【Notes】 ⚫︎ Everything in the pictures is included. ⚫︎ Surplus parts are not included. ⚫︎ The outer box is not included. ⚫︎ I will clean the model before shipping, but dust may remain in intricate areas due to long-term storage and the semi-gloss topcoat. ⚫︎ This is a handmade item, stored and inspected by an amateur, so it may not be suitable for those seeking perfection or who are overly concerned about details. 【Shipping Method】 ⚫︎ Parts with a high risk of breakage will be removed and individually packaged. Other parts will remain attached to the main body and wrapped in cushioning material, then shipped in a used cardboard box. If you have any questions regarding shipping timing, discounts, or anything else, please feel free to contact me.