This is a stand for 1/6 scale dolls. The base has a light blue cat-paw design. The fourth photo shows the contents of the set. *Unlike the previously sold item, the pole is made of metal instead of acrylic.* The base is 11cm wide. The stand is adjustable as shown in the photo, ranging from 9.5cm to 16.5cm. Since the base is 1.5cm thick, it will be longer if you pose the doll without attaching its feet to the base. The acrylic plate of the base will be delivered with a protective sheet attached, so please peel it off as needed. *The third photo shows the state after removing the protective sheet.* Please note that some items may have the protective sheet re-attached for inspection, or the bag may have been opened. The pole that inserts into the base is quite tight, but it can be inserted by twisting it in. *This type doesn't insert all the way in, so you don't need to push it in deeply.* If you still can't insert it, you can make it easier to insert by gradually sanding down the insertion part of the stand pole with sandpaper. Of course, it can be used for figures other than dolls. If there is stock remaining, please contact us if you need multiple items. #azone #obitsu #licca #barbie #doll #figure #stand