■ Product Umbrella stand for raft fishing and crucian carp fishing ■ Size Width (long side of the base metal plate) approx. 170mm, Depth (short side of the base metal plate) approx. 104mm Cylinder height (height from the ground) approx. 104mm, Cylinder inner diameter approx. 30mm, Outer diameter (approx. 33mm) Weight approx. 430g (including 3 sets of base screws) ■ Description This is an umbrella stand that can be used for raft fishing, crucian carp fishing, etc. You can use it with umbrellas that are about 20-30mm in thickness, based on the inner diameter of the cylinder and the length of the screws that hold the umbrella. * It will be a tight fit at 30mm, so it's safer to consider umbrellas up to around 29mm, taking into account some margin for error. It's compact, so it's very convenient to carry around. The stand can be fixed to the raft with 3 base screws, and the umbrella can be fixed with a knob bolt. The material is steel SPHC/SPCC, and it is painted with a matte black finish to prevent rust from seawater. The 3 sets of base screws shown in the photos are also included. A spare knob bolt for fixing the umbrella is also included. The wood shown in the photos is for installation illustration purposes only and is not included. Quantities are limited, so please consider purchasing as soon as possible. #Umbrella #UmbrellaStand #UmbrellaFixing #RaftFishing #Kase (Raft) #UmbrellaFixing #SunburnProtection #Heatstroke #Chinu (Black Sea Bream) #Kurodai (Black Sea Bream) #Outdoor #CaptainStag