# You can see all products from Sakura Miyabi Acrylic Boards ☆ ⚠️ As of January 4th, we cannot secure 1kg of a single type, so even if you specify the thickness, other materials will be mixed in. If you have a preference, we will prioritize it. ☘️ These are scraps of acrylic boards from our processing plant. ☘️ They are new, unused items with protective film attached. ☘️ We will pack as much as possible into a dedicated box (within the weight limit). ☘️ 【1mm / 1.5mm / 2mm / Occasionally 4mm】 【3mm】 【5mm / Occasionally 8, 10mm】 We have separated them into boxes for each thickness, so if you have a specific request, please let us know after purchase. If you have no specific request, we will put in the most abundant items first. ☘️ They are machine-cut, so the right angles are accurate. ⚠️ These are small scraps with a short side of approximately 6cm or less. The long side is 30cm or less. ⚠️ For 1-2mm thick boards, the short side is approximately 10cm or less. ⚠️ Because they are cut scraps, most of them have not had their edges processed. ⚠️ Occasionally, there may be some with cracks, chips, or some processing, or with holes (only about 2 or 3 pieces at most). ⚠️ Due to weight restrictions, we will not use any special cushioning materials for packaging. We will simply put them directly into the box. ✅ For Nekopos 1kg, the amount that can be packed is small, so they will move around quite a bit in the box. ✅ For Yu-Packet Post 2kg, we will pack as much as possible, which will be around 1.8kg. We have a lot of them, so please consult with us about shipping in other boxes. Thank you.