I removed the pegs and bridge from the body I won at auction, ultrasonically cleaned them, and polished the fingerboard and frets. Afterwards, I added six switches, rewired the pickups, and created an original model with new features. As a feature, I devised the wiring of the three pickups to achieve the following functions. ※ See the operation manual (photo No. 10) ※ It is possible to create sound combinations that cannot be produced with a normal ST. (Please try it!) <New Features> 1) Parallel/series wiring selection for neck and center pickups ① Parallel (Normal) ② Series <2P mini switch> 2) Parallel/series wiring selection for center and bridge pickups ① Parallel (Normal) ② Series <2P mini switch> 3) Center pickup phase ① Normal ② Reverse (Reverse phase) <2P mini switch> 4) Tone control/output function selection <Mini switch with neutral position> 1️⃣ Tone control ON 2️⃣ Tone control OFF 3⃣ Output OFF (KILL) 5) Coil tap function for neck and bridge pickups <Mini switch with neutral position> 1️⃣ Rear pickup 2️⃣ OFF (Humbucker) 3⃣ Front pickup <Appearance, Condition> ☆ Paint color: Piano black ☆ Appearance: Paint peeling due to dents on the body and headstock, but repaired with the same color after filling the scratches. (See photos No. 16-18) ※ In addition, there are scratches and small dents due to aging. ☆ Frets: Almost no wear ☆ String height (low), octave adjustment done ☆ Neck is almost straight ☆ Strings: New (9-42) ☆ Tremolo arm: Included ☆ Weight: Approximately 3.5kg