Privacy and terms of service
(JP¥1,900)
+HK$391.99 Shipping fee
+HK$15.47 Service fee
Text is automatically translated.
Report translation issueText is automatically translated.
Report translation issueFraud prevention
Customer support
Refund support for customers
Item condition
Brand New
Ships from
Japan
Category
Seller info
Nob
5/51574
2x4 Adjuster Set of 7 with Screws Included Includes scratch-resistant sheets This is a DIY part for fixing 2x4 lumber vertically to create posts. If you just want to erect posts, you don't need complicated procedures or special tools. It can be securely fixed using the force of a jack, making it easy to install. Easy Catwalk Imitation and plagiarism are prohibited. Adjusters with only the upper part have existed for a long time, but I thought about how to make it work for those who don't have a drill or an 8mm drill, and came up with and created the lower part. I came up with the drill-free type. DIY Storage Parts Washers have been added between the upper hexagon and the lumber. Adding them provides stability and prevents loosening. Therefore, when assembling the upper part, insert the washer onto the bolt before inserting it into the hole. Assembly Since it will be shipped disassembled, insert the washer into the bolt as shown in Photo 3, lightly tighten it (do not overtighten), then insert the part, followed by a washer, nut, nut, and washer in that order, and tighten the upper part with the nut. Installation Method ① Cut the 2x4 lumber that will be the post to a length of approximately 80mm less than the installation height. ② Screw the lower part of the adjuster to the top of the 2x4 cut in ①. (Photo 4) ③ Insert the threaded side of the upper adjuster into the hole of the post made in ②. ④ Once positioned at the installation site, stand it vertically (use a level), and you can tension it by turning the lower nut clockwise with a wrench. 〇Please sandwich the scratch-resistant sheets between the floor/ceiling and the post/adjuster. It's easy to attach them with double-sided tape. Required Tools 〇13mm wrench or monkey wrench or similar tool to turn the nut 〇Electric drill or impact driver or Phillips screwdriver 〇Saw (You can also have it cut at a home improvement store) 〇Level (There are also apps available.) Drill not required Due to being handmade, there may be slight variations. Painted versions are also possible, so please contact us. Any quantity is possible. Please contact us. #Adjuster #Cat Tower #Catwalk #Wall Mounted TV #Tension Wall Storage #Partition #Anti-tip #Escape Prevention Fence
1 hour ago