／ Instant purchase OK! ❣️ ＼ Items from various genres are on sale! ▶︎▷▶︎ #YuShop's product list is here ✨ ＊Free shipping ✨ ＊Midnight silent purchase OK ◎ ＊Please note that we do not accept returns for reasons such as "it's different from what I imagined." ・Please understand that items are stored at home and will be shipped in simple packaging before purchasing (⁎ᵕᴗᵕ⁎) ・Please check the actual photos for the condition of the product ♪ Compatible models: Pokemon Pokepeace MY PAD (My Pad) ● Cuts approximately 29% of blue light (380-495mm) that is said to be harmful to the eyes. ● High-hardness specification to firmly protect the image. ● It has flexibility and will not break even if it receives an impact like a glass film. ● Using a special silicone adhesive, even if air bubbles remain, they will naturally disappear. It leaves no residue even when peeled off. It can also be reapplied. ① 【Preparation before work】 ＜How to use＞ ● It is recommended to perform the application work in a place with as little dust as possible. ② 【Confirmation before application】 ● Place the protective film on the screen and align the position of the earpiece, camera, sensor, etc., and carefully check the top and bottom and the front and back, and the correct positional relationship. ● Aligning the position correctly is the most important thing for a clean application. Dust, air bubbles, and dirt can be removed later. Once you start applying, don't worry about dust, etc., and prioritize applying it to the correct position first. ③ 【Application work】 ● While being careful not to get dust, dirt, or fingerprints on the silicone adhesive surface, peel off a part of the "① Adhesive surface protection" film. ● Set the protective film with reference to the confirmed positional relationship, and slowly apply it while peeling off the "① Adhesive surface protection" film little by little. ● If you feel that the protective sheet is tilted or misaligned during the process, peel it off and reapply it. It can be reapplied many times. ● If you feel that the position is misaligned after finishing the application and you want to peel it off and reapply it, it is convenient to use cellophane tape on the edge of the protective sheet as a handle for position adjustment. ④ 【Removal of dust, dirt, and air bubbles】 ● Attach cellophane tape to the edge of the protective sheet near the dust and dirt, lift it slightly, insert another cellophane tape into the gap, and attach and remove the dust and dirt. ● Air bubbles can be removed by gently pressing them with your finger or by lifting the edge slightly and reapplying. 6-66 0001