This is a case for attaching the Kodak Charmera to a hot shoe. Originally designed and manufactured for personal use, I am offering it for sale in the hope that it will be useful to others with similar needs. 【Product Features】 ・Allows access to the Kodak Charmera's power button / shutter button / USB port / key chain hole while the case is attached. ・Made of PETG resin, which is more heat-resistant than general PLA resin, for outdoor use (heat resistance: approx. 69°C). ・Comes in a set of 3 different lengths (to be used depending on the lens length when attached to a mirrorless camera). ・Printed with 100% infill for strength. ・Made with a Bambu Lab 3D printer. ・Hot shoe part designed with reference to ISO 518 standard (※Please also check the notes below). 【Included Items】 ・Mount Low x 1 ・Mount Medium x 1 ・Mount High x 1 【How to Use】 ① Attach the Kodak Charmera to this product. ② Attach this product to the camera's hot shoe. 【Important Notes】 ・Kodak Charmera / mirrorless camera body are not included. ・May be damaged by strong impacts such as collisions or drops while attached. Please handle with care. ・This product is a 3D printed product, so there may be layer lines and slight individual differences. ・The fit (tight/loose) may vary depending on the shape/tolerance and individual differences of the hot shoe. Please adjust with tape, etc. ・We are constantly making improvements. The design may differ from the photos depending on the purchase date. ・May deform in high-temperature environments (such as inside a car in direct sunlight). Please be careful about the storage and usage environment. 【Disclaimer】 We are not responsible for any damage or disadvantage caused by the use of this product. Please understand this in advance. Thank you very much for reading to the end. We hope this will be useful to you. We look forward to your purchase.