CORGI ON BOARD Welsh Corgi This is a waterproof sticker. Color: Black (Ideal for white-based rear trunks and bumpers) Size: 15cm x 9.5cm If you are looking for a different shape for the same breed, click here → #kiriCorgi Instant purchase without comments is OK. You don't have to greet me after purchase if you find it troublesome. Note: When applying to a car body, wash the car and remove the wax. You will have difficulty with step ④ of the application if wax remains. Also, the sticker you just applied may peel off during subsequent car washes, so we recommend washing the car before applying the sticker. How to apply the sticker ① Peel off the release sheet attached to the adhesive side of the sticker. Peel carefully so that the sticker does not come off with this release sheet. After peeling, the sticker will be attached to the transparent sheet on the surface. ② Once you have decided where to apply the sticker, hold the transparent sheet of the sticker with both hands and apply it. ③ Apply the sticker by pressing down on the transparent sheet with a soft cloth such as a towel. ④ Finally, peel off the transparent sheet on the surface, but peel it slowly as the sticker may come off with it. If the sticker part comes off with it, apply it carefully so that it remains on the desired location. ⑤ After applying, firmly rub the applied sticker to finish. ⑥ You can apply wax after applying the sticker. Other techniques If air bubbles form, apply a thin cloth to a hard board such as a credit card and push out the air bubbles. Also, if you can't remove the air bubbles, make a small hole with a needle or cutter to let the air bubbles out. Dog on board Car sticker Seal.