Shipping costs will be combined for multiple items. You can search for parts currently on sale from #みるをパーツ ♡ *The "Kusumi (Japanese)" series has very good color development, so please add it to the resin liquid in small amounts to adjust the color. Add the desired amount to the resin liquid and mix slowly with a stick, etc., being careful not to introduce air bubbles. Pour into your favorite molds and cure. Adding too much may result in stickiness or incomplete curing. ・There is a possibility of poor mixing, discoloration during curing, or incomplete curing, so be sure to test with a small amount before use. ・Since it is prone to separation, please shake well before use until the color is even. ・The concentration and color of the colorant may vary depending on the arrival time. *This is unavoidable due to being an overseas product. ○Contents: 7-color set of colorants ○Capacity: 10ml/bottle (The amount may vary slightly) ○Bottle size: Approximately 68 x 21mm ○Colors: Gardenia (Kuchinashi), Matcha, Purple Sweet Potato, Small Plum, Indigo (Seiran), Tonocha, Walnut (The sizes listed are approximate. Actual dimensions may vary slightly.) When using the colorant for the first time, the tip of the nozzle is not open, so please make a hole with a thumbtack or needle. (If you cut the tip of the nozzle with scissors, the hole may become large and cause leakage, so please be careful. In the case of glitter or powder, if the hole is small, it may be difficult to dispense, so adjust the size of the hole)