Thank you for viewing this product. Please read the profile section before purchasing. This is an offering for [Mini 4WD Catcher Dampers]. ■ These are cut from Tamiya's genuine Mini 4WD catchers, black and red. They can be used without restrictions from daily practice to Tamiya official competitions. ■ 《NEW!》 Based on the highly acclaimed [typeF], developed with the cooperation of leading racers active in the Sendai/Tomiya area! With a double frame structure of main (red) and sub (black) and the adoption of angle adjustment chips, a variety of settings are possible that cannot be achieved with a single cut-out product! -------------------- [Product Details] ＊Total Length → Main: approx. 61mm 　　　　　　　Sub: approx. 62mm ＊Mounting hole center to catcher rear end 　→ Main: approx. 57mm 　　Sub: approx. 58mm ＊Optimal for the popular MS chassis (flex). ＊Main only (image 4), sub only (image 5), main + sub (image 6), allowing for versatile settings to match the course layout! ＊A new side frame is installed on the main to apply tension when combined with the sub! (Image 8) Maintains the initial position of the main plate! ＊You can further adjust the tension using the included chips (please attach them to the sub plate with double-sided tape, etc. - see images 9, 10, 11) ＊Weight mounting holes are not pre-drilled. Please adjust the hole position and total length to match your machine (image 12) ＊The images are samples. Please note that the cut lines of the product you receive may differ slightly. ＊Genuine catchers are used. There may be vertical creases as shown in image 13, or the product's lettering and pressed patterns may appear randomly as shown in image 14. ＊Available colors are [BK/BK], [RD/BK], [BL/BK], [C.G/BK] ＊A list of typeF only (including custom) is here ↓↓↓ #CatcherDamperTypeF -------------------- [Handmade by an individual.] There may be individual variations in size, cut lines, and hole positions. Please purchase only if you agree after confirming the images. Please ask if you have any questions. [Search Keywords] Tamiya mini4wd Mass Damper MS Chassis (Management No. 22)