Mini 4WD Hinge-Type Front AT (FAT-Fix) Based on the convenience and running performance of the hinge-type movable parts CH-Fix series, it has been developed for the front AT. Unlike the sliding of a general shaft hole, it moves very smoothly due to the hinge structure. Made with high-precision CNC using Tamiya genuine carbon. Offered to those who need it. ■Features of FAT-Fix ・A structure that does not lose thrust regardless of the chassis cut line. ・The opening/closing angle of the hinge is approximately 30 degrees. ・Compatible with the separately listed FAT-SD2. ■Assembly Instructions, etc. ・Please assemble the included parts by referring to photos 5-10. ・There is no mechanism to hold the hinge in the home position. Please use rubber rings, etc., as shown in photos 17-18. (Although you can usually run without holding it, the settings may become sensitive when combined with a lantern that is linked to the AT.) ・3mm thick carbon is used for the bumper plate. Please slope the bottom surface according to the vehicle height and brake sponge settings. ・Countersunk screw processing is required for the hinge base plate (photo 6). ・Other carbon parts and screws are not included, so please prepare them separately. ・Genuine slidable dampers and SD-Fix cannot be installed as is. Processing is required so that they do not interfere with the hinge part or chassis (photos 15-16). ・Please use insulating washers as shaft spacers. ・Please check the other specifications and condition in the photos. ■Only the set of parts in photos 3-4 will be sent. (The center two holes of the hinge base have been filled. Please note that this is different from the other assembly photos.) ・The photos are samples, and minor improvements and changes may be made. (The presence/absence and position of the hole filling may be changed.) Those who are extremely sensitive to the appearance, etc., should refrain from bidding. Returns and support are not available. Please consider only if you can process carbon and make fine adjustments yourself. Please bid after understanding these points. ■Also listed elsewhere. Please understand that it may be sold out depending on the timing.