CMC18 (Compact Motor Case) Mini 4WD 18-Motor Compact Motor Case *This is a reverse-direction storage type.* This compact motor case is designed to more efficiently manage motors in racing scenarios, storing 18 motors. It supports both-shaft (or single-shaft) motors with pinions attached, and incorporates features to improve workability and visibility. ＜Materials＞ Outer semi-transparent case (polypropylene) Storage holder (ABS resin / 3D printed) ＜Size＞ 18.1cm × 9cm × 2.8cm ＜Features＞ ■ Stores 18 motors with pinions attached Both-shaft (or single-shaft) motors can be stored smoothly with pinions attached. This improves work efficiency and allows for quick motor changes at the race site. ■ Alphabetical labeling for improved visibility The holder is labeled with the alphabet, improving the visibility of motor management. ■ Clearance design to avoid pinion interference Space is provided between the pinion and the case wall during storage. It does not interfere even if the pinion position is adjusted by about 1mm. ■ Motors are arranged with the side without the sticker facing up The design allows the motors to be stored with the side without the sticker facing up, considering the motor specifications. ■ Stable storage with moderate holding power Moderate holding power is pursued to prevent the motors from moving inside the case. Motors will not move around during transport, allowing for safe carrying. ＜Product Notes＞ Due to being 3D printed, the mounting parts may become loose with use. Layering marks and stringing may occur, but this does not affect use. Specifications may change depending on the purchase date.