This chassis is based on an MS Flake and equipped with the main gimmicks. It is a full carbon gimmick chassis with a matte finish carbon fiber applied by an external company. Details are as follows: Hashiwatashi (Bridge) "The front and rear centers are connected with straight carbon fiber that has been split, preventing the center chassis from cracking. Insulated." Front AT Step-Down Slide Damper "This is a step-down slide damper. Thrust can be changed with washers, and the existing slide damper cover is installed. Please adjust the slide damper. The roller screw heads are also hidden." 1-Axis Rear Anchor "Dedicated to 19mm and 13mm rollers. Please adjust the swing width of the anchor." F Angled Brake "Regarding the brake, it has been processed into an angled brake at the front. It can catch the track from a point rather than a line, so a significant deceleration effect can be expected. The rear plate has been processed with countersunk screws for mass placement." Front Lantern "It is a lantern combined with a multi-type, which is hard to break, and has been processed to prevent chatter." MS Flake "Normal center damping type flake. POM torque increase processing has been done. For details, please check the flake sales page." It is assembled on the premise of setting up Pera tires, so the front is raised 3mm and the rear is raised 1.5mm, and the underside is also raised. The front and rear units are reinforced with instant glue, and the screws for the catcher damper are left. Also, please adjust the slide damper and anchor. It may be canceled as it is also sold on other frames. Please understand. If you have any questions, please feel free to comment. Thank you very much.