MSR-Pack22 Original Pack For R&D SPARK Splitboard Bindings For MSR Lightning Ascent Snowshoes 22 inches *This listing is only for the pack shown in photos 1 and 2 (screws and nuts included). *Crampons, bindings, boots, and snowshoes in the images are not included. *Photos 3 and onward are reference photos. *You will need tools to remove the rivets from your MSR crampons. *The fixing nuts are embedded in the pack, but be careful not to overtighten them, as this may damage the grooves on the pack. This pack, designed to attach Spark bindings to snowshoes, was 3D printed and attached to the crampons of MSR Lightning Ascent snowshoes (Material: PETG). It's the snowshoe version of Verts Snowshoe for SPARK Bindings. Designed to center a TT boot size 25.5cm on the 22-inch Lightning Ascent. Currently undergoing field testing in the backcountry this season, and there have been no issues so far. The snowshoe heel lifter can also be used. This product is a used item. *This is a handmade item, so we cannot provide any warranty for damage during use. We are not considering any discounts.