Hiace 200 series 2.8 Diesel Narrow Body Left and Right Set M6 6-hole specification Recaro rails Used in the 7th generation. The driver's side is ultra-low down. The photos from the 1st to the 4th are the actual items. There are paint剥がれ (peeling) etc. The photos from the 5th onwards are installation examples posted by the vendor who sold these rails. The following is a copy and paste of the vendor's explanation. Please be sure to read the following product description. The photos were taken with the cooperation of Mr. T, who helped us during the prototype production. Photos of his 2.8 diesel car are posted. The driver's seat of the car in the photo uses our original ultra-low down seat rail. It is as low as possible with the original slider. (See photo) "Notes" For the passenger seat side of the 200 series 5th generation 2.8 diesel, due to the change in the floor shape along with the engine change, a considerable amount of modification was required to install the Recaro seat, and we had not offered a setting until now. This time, with the cooperation of Mr. T, after repeated prototyping, although low-down is not possible, a specification has been created that allows Recaro seats to be installed at the same height as the Hiace genuine seat (depending on the type of Recaro seat). Interference is also considerably reduced. (See photo) However, an ultra-low down specification like the driver's seat is not possible due to the floor shape. The feeling of sitting on the seating surface of the Hiace genuine seat and the Recaro seat (SR3) is -10mm in terms of dimensions, but the eye level doesn't change much. (Our comparison) Please judge the driver's seat's ultra-low down (as low as possible) and the passenger seat's feel from the photos. We apologize to those who want a low-down passenger seat for the 2.8 diesel car, but please refrain from purchasing as the current size is made with measurements up to the limit. This is for the 2.8 diesel passenger seat only. Compatible products Recaro L series (LX.LS.Ergomed) SR.SR2.SR3.SR4.SR5.SR-VF "6-hole" 6mm Compatible with seats with a flat bottom. Note: Trend, AM19, etc., which do not have a flat bottom, are not compatible. Installation dimensions Front and rear 260 (235 + 25) mm, left and right 405 mm. (Not compatible with those with different installation dimensions.) 6mm 6-hole installation specification only