Size Total Length: Approximately 455mm Blade Length: Approximately 300mm Width: Approximately 38mm at the base to 27mm at the tip Thickness: Approximately 1.7mm at the base to 1.1mm at the tip Weight: Approximately 150g Steel Material: MKV10 Stainless Steel Hardness: Approximately HRC61 Manufacturing Process: Vacuum Hardening and Sub-Zero Treatment Surface Treatment: High-Gloss Mirror Finish (Fully Hand-Polished) Handle: Ebony and Black Water Buffalo Horn Octagonal Handle Saya (Sheath): None Fully sharpened, rust-resistant. #Bonsai Knife Yanagiba Knife List This knife has undergone vacuum hardening and sub-zero treatment and features a high-gloss mirror finish (fully hand-polished). The flat and back sides have a mirror finish, providing both beauty and a sense of luxury. Furthermore, the back, flat grinding (V-shaped), and back thinning are carefully applied, and by gradually thinning the blade, the blade's condition is kept in very good condition. The blade angle is polished to almost the thinnest level, and the small blade is almost gone, achieving the ultimate sharpness. The cutting edge is ground to the minimum angle and then given a hairline finish, resulting in a finish that is meticulously crafted down to the smallest detail. A lot of time is spent on the complete hand polishing, and you will be able to appreciate its value. Because it is fully sharpened, you can enjoy excellent sharpness immediately after purchase. Furthermore, it is not only very thin but also beautiful in shape, with a slender tip that extends like a willow leaf and a straight blade path. Combined with the sharp blade, you can experience unparalleled sharpness and a pleasant cutting feel even in delicate tasks such as fugu (pufferfish) cuisine. The blade angle has been polished to almost the thinnest level. The small blade has almost disappeared, so the blade condition achieves the ultimate sharpness. Therefore, you can use it immediately. Since it takes time to completely hand-polish, its value is also very high. The cutting edge is ground to the minimum angle and given a hairline finish. The flat and back sides have a mirror finish. Due to the nature of the product, minor scratches and stains are unavoidable during manufacturing, but this is not a defect. Please refrain from purchasing if you are concerned or if you are looking for a perfect product. We cannot issue receipts. Please understand. Returns are not accepted unless there is a problem with the product. If you have any questions or requests, please feel free to contact us. #Knife #JapaneseKnife #Ebony #Gin-san (Silver 3) #SilverWrap #Handle #Saya (Sheath) #Rosewood #Hon-yaki (True-forged) #Kitchen #JapaneseFood #Itamae (Chef) #Cook #Damascus #Gyuto (Chef's Knife)