I plan to start a furniture job in February, so I'm not sure when I'll be able to make more items. All items listed on this site are the entire inventory. I selected SPF lumber from the market with few knots and used high-quality lauan plywood for the back panel. I've added a flame maple border for a luxurious finish. It has a powerful sound that rivals a 12-inch speaker. I recommend ceramic speakers. Speaker: 10-inch specifications Body: SPF lumber (15mm thick) Back Panel: Lauan plywood (15mm thick) Grille Cloth: Oxblood Yellow Baffle Board: MDF (12mm thick) Speaker Mounting Screws: (8-point, 5x20 truss head screws included) Speaker Mounting Screw Position: (244mm) Wiring: Switchcraft #11 mono phone jack, shoulder-type insulating washer, plastic insulating washer, jack plate (may have scratches even if new), BELDEN 9497, Faston terminals (Audio-Technica TL205M, male side 5.2mm), Kester 44 solder used Handle: Fender type raised Insulators: Fender USA Paint: Oil stain (teak color), urethane sanding sealer base coat, urethane half-flat finish coat Dimensions: W450 x D280 x H362 (including 12mm insulators) Weight: 5.45 kg I put a lot of effort into making this carefully, so it has a solid construction that affects the sound. I hope you enjoy experimenting with this cabinet, such as adding sound-absorbing materials or changing the speakers and wiring, while searching for your favorite sound. The wood grain is continuous because the boards are assembled in sequence. The older growth rings (the outside of the tree) are on the outside of the cabinet, just as they were when the tree was alive. The body is joined using half-blind dovetail joints. I try to be as careful as possible in the manufacturing process, but there may be scratches, dents, warping, chips, cracks, color unevenness, paint unevenness, and speaker mounting marks. Please judge based on the photos. Please note that this is a cabinet-only listing and does not include speakers. Shipping will be via Yamato Transport (cash on delivery, bring-in discount).