1/10 Tamiya TT-02 Steering Wiper Conversion Adapter (For Advanced Users) (3D Printer・PLA) This is an adapter that converts the MRC conversion steering wiper to a protruding type. Some processing is required, so please refrain from purchasing if you are not good at processing. Made based on the RDX knuckle, so RDX knuckle is recommended. The rolling feel at deep angles has improved, and the impression is that the vehicle speed has also increased. (Processing Procedure) ① Cut the wiper Cut leaving 6mm from the "く" shape (See image 6) ② Insert the conversion adapter into the steering wiper all the way ③ Mark the wiper and drill a 2.5mm hole ④ Fix with button head screws (10mm) and thin nuts (be careful not to overtighten) (Screws and nuts required separately) ⑤ Insert the included collar into the wiper base, cut the interference part (See image 5) ⑥ Return to the original procedure. (Dimensions) Length: Approximately 12mm Width: Approximately 9mm Depth: Approximately 12mm Please ask if you have any questions. # Tamiya # TT02 # Radio Control Car # Drift