This chassis is based on the MS-Flex with mainstream gimmicks installed. This is a full carbon gimmick chassis with matte finish external carbon applied. Details are as follows: Hashi-watashi (Bridge Crossing) "The front and rear centers are connected with straight carbon, preventing the center chassis from cracking. Insulated." Front AT Step-Down Slide Bumper "This is a step-down slide damper. Thrust can be adjusted with washers, and the existing slide damper cover is installed. Please adjust the slide damper yourself. The roller screw heads are also concealed." 1-Axis Rear Anchor "For 19mm and 13mm only. Please adjust the anchor's swing range and movement through processing." Front Angled Brakes "The brakes have been modified to be angled forward. They grip from a surface rather than a point, which is expected to significantly improve deceleration. The rear plate has been countersunk for screw heads." Front Chochin (Lantern) "This is a durable chochin made with a multi-piece mold, and it has been treated to prevent judder." MS-Flex "This is a normal center damping type flex. POM torque increase has been applied. For details, please check the flex sales page." This chassis is assembled with the assumption thatペラタイヤ (thin tires) will be used, so the front is raised by 3mm, the rear by 1.5mm, and the underside has also been raised. Both front and rear units have been reinforced with super glue, and screws for the catcher damper are left in place. Furthermore, please adjust the slide damper and anchor through processing. This item is also sold on other platforms and may be removed. Thank you for your understanding. Please feel free to comment if you have any questions. Thank you.