※ This listing is for the brake sponge cut guide only. Knife and sponge are not included.
This is a guide tool for cutting Tamiya Mini 4WD brake sponges at various dimensions and angles.
====
How to Use
====
Set the brake sponge.
・Insert a knife at the marked angle to cut at the specified angle or dimension.
・By combining with other products, you can cut at 5-degree intervals from 20 to 60 degrees, and at 7/10/13/16.6mm.
・I use an Olfa L-size knife (11B). A larger size is recommended.
・Applying a small amount of lubricant to the blade allows for smoother cutting.
※ Please be careful as you will be using a blade.
====
Details and Notes
====
Material: PLA+ (Reinforced PLA)
Size: 6.4cm wide x 3.5cm long x 0.9cm high
Color: Gray, Black (Varies depending on the filament in stock)
※ Finishing is done before shipping, but warping, burrs, stringing, and layer lines unique to 3D printers may be visible. There is no problem with use.
※ Burr removal is performed during inspection, so sanding marks may remain.
※ Color and gloss may differ from the photos.
※ There is no "Straight/Slash" marking. The first photo is the product.
※ This is a sale of the brake sponge cut guide only.
※ This is a tool that uses a blade, so please be careful. We are not responsible for any accidents or injuries that may occur.
※ This is a 3D printed product, so please purchase only if you understand this.
※ No price negotiations.
#Mini4WD
#MiniYonku
#Tires
#Carbon
#TAMIYA
#Tamiya
#Mini4WDcourse
#Jig
#Anchor
#Shaft
#Model
#Power
#Roller
#Screw
#Nut
#RubberPipe
#Brake
#Slope
#Bank
#AluminumSpacer
#ThrustPlate
#BearingChanger
#CarbonMultiWideStay
#2-StageAluminumRoller
#CarbonMultiWideRearStay
#CatcherDamper
#WheelPuncher
#Piercer
#Motor
#MotorCase
#BatteryCase
#mini4wd
#PitBox
#PortablePit
#Brake
#BrakeSponge
#Cut