Thank you for viewing. This is a listing for one finished contrabassoon reed. ・Reed Dimensions Blade: Approximately 36mm Tube: Approximately 33mm ※ Total Length: Approximately 69mm ※ ※) Danzi material is designed with a shorter tube length, so while maintaining the balance of playing feel, the pitch will be approximately 1.5 to 2 Hz higher than usual. The shaper used is Rieger No. K1 (tip width 20.00mm). ※ Rieger No. K1 is an orthodox type of shaper that combines a unified tone and a rich resonance. ・Materials Italian Danzi (Material origin: Southern France) This material has a firm texture and a bright, powerful tone. The hardness is selected and used from 13 to 20 (slightly hard to slightly soft) on the Reeds'n Stuff hardness tester. To minimize changes after finishing, it takes about two months from assembly to finishing. During finishing, the reed is carved so that the "p" articulation responds without problems, the balance is good from low to high notes, and a wide range from "p" to "f" can be produced. The reed is finished so that the tone remains firm even when playing "f", so it is mainly suitable for intermediate to advanced players, such as: ・Those who want to blow a little harder ・Those with a large lung capacity ・Those who like reeds with resistance ※ Since the reed has been test-played during finishing, it is listed as "Like New". #Bassoon #Bassoon