NEC IX2215 Latest Firmware 10.9.11 IPoE Compatible Made in July 2015 NEC IX2215 Body only. No power cable, original box, or other accessories included. Made in July 2015 ★Initialized Version★ ・A console cable is required for initial setup. ・After initial setup, web console operation is possible via LAN cable. ・Recommended for those who want an initialized version as it has no unnecessary settings. Main Features IPv4/IPv6 Support PPPoE Support IPoE (map-e/ds-lite) Support VPN Support Dynamic Routing Support Netmeister Connection Possible Fanless Wired LAN Standard: 1000BASE-TX (All ports support Gigabit) Many other features IPv4 Forwarding Performance: Up to 2Gbps IPv4-IPsec: Up to 1.3Gbps Memory: 256MB This model is used as a WAN router for businesses. It is used not only for connecting business locations but also by individuals to stabilize their home telework environment. It is a current model still sold by NEC. For simple settings, it can be easily configured on the web screen, similar to a regular home router (see photo). The firmware is also the latest version as of September 28, 2024, so it can connect to NetMeister, and DDNS, cloud management, and firmware update services are available for free from NEC. The following was performed for this listing: ・Dust cleaning with an air duster after opening the lid ・Power-on confirmation ・Firmware version confirmation (10.9.11) ・Temporary settings were entered into a total of 3 ports, GE0, GE1, and GE2, and internet connection was confirmed by connecting a FLET'S line (IPoE line) and two PCs. ・Initialized to factory settings Although the above initial checks have been performed, functionality cannot be guaranteed as no other operation checks have been performed. Please understand that returns or exchanges are not possible except for power-on failure within 3 days of receipt.