New Version Mini 4WD Motor Break-in Commutation Bearing Maintenance Universal Oil Bic Boost 10ml 【Improved version released due to popular demand!】 By adjusting the fine carbon particles for use not only on motor commutators but also on bearings and adding anti-Newton additives, it is less likely to scatter and the effect lasts longer. According to the developer's own use, one 10ml bottle was enough for 3 months of Mini 4WD use. Product Description Universal oil for Mini 4WD motors and bearings. Just a small amount applied to the motor bearings and commutator from the end bell results in a rotational speed increase of around 2000 rpm. Usable before break-in (out of the box), after break-in, and for motors that have been stored for a long time; no cleaning is required. If you hear a chattering sound or the speed decreases, apply a small amount to the bearings and commutator again. The ingredients include fine carbon particles with high conductivity and low friction resistance, maintaining a high level of electrical conductivity between the brushes and commutator while providing high lubrication and rust prevention effects, preventing the commutator from rusting. In addition, it can be used for the following purposes: ・Break-in oil for tuned motors ・Break-in oil for dash motors ・Bearing break-in/lubrication oil ・Oil to apply to the cutter when cutting brakes diagonally ・Oil to apply to the knife when using a propeller cutter ・Oil to apply to the knife when cutting the wheel rim with a tire setter, etc. ※Using it for multiple purposes will increase the oil consumption rate. Precautions for use Flammable, may cause inflammation if it comes into contact with skin or eyes. Keep out of reach of children. Dangerous Goods Class 4, Group 3 Petroleum, Hazardous Rank III Container Specifications Material: PET Type: Unicorn bottle 10ml Dropper: Stainless steel / Outer diameter: φ1.2mm Cap: Silicone rubber Iron balls sealed for solution stirring Other Product stickers are to be applied by the customer. Finally, to avoid contaminating the track with oil, please use it correctly, following the instructions for use, capacity, morals, and manners.