This shielded wire combines the best of vintage quality with top-of-the-line current components. It uses vintage wiring, specifically 1940s-50s Western Electric black enamel solid core wire known for its superior sound quality, shielded with a braided shield. By replacing the wiring in the jack section, which is particularly effective in circuit upgrades, you can easily improve sound quality and reduce noise with the shielding effect. Western Electric solid core wire is very clear and provides output from top to bottom, but because of its clarity, it can sometimes sound too clear when paired with low-output vintage single-coil pickups. However, by twisting two solid core wires together, you can also achieve the nuances of stranded wire. The twisted solid core wires are combined with a braided shield, which is highly effective for noise reduction. The jack is a top-quality Pure Tone Jack PTT1. Unlike conventional jacks, it has four contact points (two for hot and two for ground) to securely hold the connected phone jack. This prevents looseness and poor contact, and also increases the contact surface with the phone jack, improving the transmission of electrical signals. The length is approximately 24cm, making it easy to use with Stratocasters and Telecasters. The wire diameter is approximately 4mm. For Stratocasters, the hole for the jack may be narrow. Please check in advance. *The images are reused from previous production. The color of the wiring may vary, and the color cannot be selected. We also manufacture guitar and bass circuit assemblies. Special specifications based on various orders are also possible.