Purchased in August 2022 from BIGBOSS. Used only a few times over two years, mostly stored in its case. Used a few times in the studio last year and this year. Has never been used in a live performance, so there are no noticeable dents or scratches, but there is a scratch on the edge of the 6th string side of the fingerboard where nippers were used to cut the strings. Picking scratches are visible near the pickups depending on the viewing angle, but otherwise, there are no particularly noticeable scratches. The sound is also clear, with no crackling. Selling due to infrequent use and to fund the purchase of other equipment. Accessories: Lock pins Will be wrapped in packing material and shipped in a soft case used for storage (please consider the case as packing material). The following is a product description quoted from the website: ■ Product Description The VIPER, which was not produced by EDWARDS in recent years but is popular in heavy music, is back by popular demand. Ash is used for the body for the first time in the regular VIPER model. The body thickness is 40mm, which is slightly thinner than a typical guitar. The beveled cut also makes it exceptionally easy to handle. The neck is hard maple, the fingerboard is rosewood, and it is joined to the body by a detachable method. The pegs are Gotoh MG-T type locking tuners, and the bridge is a tune-o-matic type, a traditional specification. It has a simple control configuration with only a volume control. An easy-to-handle model with a simple control configuration for the popular VIPER in heavy music. The pickups are Seymour Duncan SH-4 JB, the standard for pickups! ■ Main Specifications BODY: Ash (Thickness 40mm) NECK: Hard Maple 3Piece FINGERBOARD: Rosewood, 24 frets w/White Binding RADIUS: 305R SCALE: 628mm NUT: Bone (42mm) INLAY: Pearloid Dot CONSTRUCTION: Bolt-on (STAR-CUT) TUNER: GOTOH SG301-04 MG-T BRIDGE: GOTOH GE104B & GE101Z PICKUPS: Seymour Duncan SH-4 CONTROLS: Volume Weight: 3.16