Brass bushings to fix the wobbly bridges on Fender Jazzmasters, Jaguars, Mustangs, etc. One set includes two pieces. Recommended for those who want to avoid resin bushings, increase the rigidity around the bridge, and prioritize a metallic resonance and clarity. The material is unplated brass, making it relatively easy to modify if it interferes with other parts. 【Size】 ・Total length: 6.5mm ・Diameter on the bridge post side: 6.5mm ・Diameter on the anchor side: 8mm ・Diameter of the flange: 13mm ・Thickness of the flange: 1.5mm ・Length under the head: 5mm 【Caution】 Bridge dimensions vary depending on the guitar manufacturer, year, and individual differences. Therefore, it may be tight, loose, or interfere during installation. ・If it's tight → Apply lubricant, file it down ・If it's loose → Adjust by wrapping masking tape or aluminum tape around the bridge post Also, on guitars with significant bridge hole position deviations, the flange may interfere with the pickguard. In that case, it may be possible to resolve the issue by filing down the flange. We cannot guarantee compatibility due to dimensional differences and individual variations, so please be sure to check the actual dimensions of your guitar. 【Installation Record】 Fender MIJ HYBRID II Jazzmaster ※See photo; the flange interfered with the pickguard, so it was addressed by filing with a stick file. 【Material Characteristics】 Due to the unplated brass, there may be small scratches, dullness, and color changes due to oxidation. #JazzMIaster #Fender #Jaguar #Mustang #ElectricGuitar