【送料無料】Heat Shrink Tube Rubber Grip Φ25mm 50cm & Φ35mm 50cm This is a set of 2. Product Overview Heat shrink rubber grip, inner diameter Φ35mm, length 50cm Inner diameter before shrinkage Φ35mm, inner diameter after shrinkage Φ20mm *The inner diameter of the tube before heating is 35mm, and the inner diameter shrinks to a minimum of 20mm after heat treatment. Applicable size: Grip outer diameter Φ20mm to Φ35mm *Recommended for grips around Φ32mm! Colors: Black, Yellow, Green, Red, Blue, 5 colors to choose from. Material: PE Shrinkage start temperature: Approximately 60℃ Complete shrinkage temperature: Approximately 105℃ Heat resistance: ~125℃ Heat-resistant, waterproof, and insulating heat shrink tube. For protecting fishing rods and preventing grips from slipping! For DIY line breakers! The image of the construction example shows a Φ20mm tube installed on a Φ18.3mm grip with a hair dryer (1200W). *Construction is possible with a household hair dryer, but it may not shrink completely if the heat is low and the size difference with the object is large. When using a hair dryer, choose a tube with a diameter that is a maximum of +3mm smaller than the diameter of the grip. If using a heat gun, you can choose an even larger size, as it will shrink to the inner diameter after shrinkage. If you want to make the tube thicker after shrinkage, choose a larger size within the range. A hair dryer or hot water can also be used, but we recommend using a heat gun for shrinkage. Also, it can be sufficiently shrunk with a gas stove. (Keep it about 20cm away from the fire on low heat, rotate the grip, and heat it while watching.) *Please be careful when working with fire. It may shrink by about -5% in the longitudinal direction. It is recommended to cut it slightly longer than the desired finished size, align the ends, heat it from the ends, and then cut off the excess. The second image shows a table of dimensions before and after shrinkage, and the tube thickness, so please refer to it and purchase the desired size. Each size is available in 50cm and 100cm units! #1091mart Heat Shrink Tube