Covered humbucker pickup made with Alnico V magnets. This is an outlet pickup purchased for maintenance. I'm selling it because I have extras. ※Please note that the images are samples. Please be aware that the outer box is dirty due to damage or tears and has been reinforced with tape. Screws and springs are included. Although it is unused, it is an outlet item, and there may be scratches, dullness, rust, uneven finish, dents, etc. that occurred during transportation and storage, so please do not purchase if you are looking for a pristine item. I find it useful because it's inexpensive and works reasonably well. Both the front and rear have a resistance value of approximately 12-14k, but this varies depending on the lot, so please inquire if you are particular about this. The rear has a wider pitch and short legs, making it highly versatile. The white copper plate and vintage-type lead wires, such as braided wire, allow for a straight and rich sound. Please use it with good wiring materials to experience a noticeable difference. ※Please install the pickup and other parts at your own risk as it is a modification. We do not provide after-sales support for wiring. Wiring diagrams and boxes are not included. Regarding the four-conductor cable, the cold wire is connected to the ground, and the tap wires are connected to each other, with the single wire being the hot wire. Sometimes they are connected in parallel, so we check the phase and match it, but if it's different or if you're combining it with other pickups, please adjust the phase before using. Due to imported goods, the purchase price and individual specifications will vary depending on the time of purchase, so the images are samples, and the exact same item will not be delivered, and the price will also fluctuate. Please do not purchase if you are concerned about details such as "it used to be like this," and we will not accept returns for minor issues other than unusable items, so please understand. The color of the cable, cord, and other parts will change from time to time. Please ask questions beforehand and make sure you understand the details, such as whether the pole pieces protrude from the back, the length, etc., before purchasing. Some adjustable pole pieces may not have screw threads, so height adjustment can only be done by pushing from the front and back. The specifications, such as the head of the mounting screws (pan head or oval head), the length, and the shape of the springs, are always changing, so the same items cannot be provided. The ears for attaching the screws may bend during shipping, so they can be bent back, and please correct them yourself before using.