Please specify the pole length and strap color in the comments. After changing to a dedicated listing, please make your purchase. The length should be specified from the stone-tipped end to the base of the strap. The grip is around 30cm, and the thickness varies depending on the material, but is about 2cm to 3cm. The powder ring is approximately 9cm in diameter, and screws are used to prevent it from falling off, so it does not rotate. Please choose your strap from the second photo. The precision of carbon or aluminum cannot be achieved. It is handmade from natural materials, and the quality is not high. I have corrected it as much as possible, but there may be some bending. The weight is heavy and varies depending on the material. However, when I swing it, it feels light and flexible, and I can't go back to carbon. The strap is 50cm long, and there is a portion that goes inside the cap, so it is effectively around 45cm. It is designed to accommodate large hands and thick gloves without stress. Important notes: The upper cap may break or fall off due to falls or impacts with trees, so please handle it gently. It is vulnerable to water. The surface is painted with urethane, but if water seeps in through the gaps, the strength will decrease. After use, be sure to brush off the snow and dry it indoors. There are examples of tip damage. Be careful as using the binding as a lever (such as switching the walk mode on 22designs) can cause it to break or bend. There have been a few cases of the cap coming off or breaking during falls. I myself have used it for over 100 days a season for 5 seasons, and I have not had any major damage such as breaking, except for a crack in the shaft and the tip falling off once. I would like to repair it as much as possible when I have time, but the shipping cost of the main body is high, so I think I will send you parts (around 1000 yen) and have you fix it yourself.