PC-330II Pioneer Cartridge + PN-330II Stylus This is a set combining a Pioneer PC-330MkII cartridge with an unused, in-stock PN-330MII stylus (made by Lecterni, TD7-330M). The PN-330/II stylus is a long-term, unused, unopened item. To confirm the cartridge is functioning correctly, it was removed from its packaging, and it was confirmed that both channels are producing sound correctly. The stylus will be returned to its original packaging for shipping. Please remove it from the box and insert it into the cartridge before use. Please check the condition of the stylus tip in the images. The PC-330II is a Pioneer record player cartridge, an improved model of the PC-330. While the shield case is the same Supermalloy, the weight has increased from 5.1g to 6.4g due to the use of an aluminum alloy die-cast frame to prevent resonance. The vibration system uses a cobalt magnet, a specially heat-treated titanium pipe cantilever, and a special diamond needle, resulting in a reduced mass of 0.45mg. The cartridge has a nameplate that reads PC-330 MARK II Made in Japan. It comes with a headshell and is ready to use. The headshell is Pioneer's aluminum type (black). Main specifications of Pioneer's PC-330II: Generating method: MM type Output voltage: 3mV Playback frequency range: 10～28,000Hz Channel separation: 25dB Channel balance: Within 1dB Load resistance: 47kΩ Needle tip: 0.5mil conical Needle pressure: 1.0～1.8g (standard 1.5g) Dynamic compliance: 12×10-6/dyne Static compliance: 18×10-6/dyne Weight: 6.4g (excluding the weight of the headshell) The total weight including the headshell is approximately 17g.