This is a stand for 1/6 scale dolls. The base has a pink cat-paw design. The fourth photo shows the set contents. *Unlike the previously sold version, the pole is made of metal instead of acrylic.* The base is 11cm wide. The stand is adjustable as shown in the photo. It can be adjusted from 9.5cm to 16.5cm. The base is 1.5cm thick, so poses that don't use the feet will be that much longer. The acrylic plate on the base will be delivered with a protective sheet attached, so please peel it off as needed. *The third photo shows the state after removing the protective sheet.* The protective sheet may have been reapplied for inspection, and the bag may have been opened. Thank you for your understanding. The pole that inserts into the base is quite tight, but it will fit if you twist it while inserting. *It is not the type that inserts all the way in, so there is no need to force it in deeply.* If it still won't fit, you can sand the insertion part of the stand pole little by little with sandpaper to make it easier to insert. Of course, it can be used for figures other than dolls. If there are any remaining in stock, please contact us if you need multiple items. #DollStand #1/6Doll #Azone #Volks #LiccaChan #bjd #Obitsu