This is an "easy-to-assemble tablero" that the buyer assembles. ◉ The handmade item is photographed and displayed. ◉ It will be shipped in the state shown in "Photo 2." ◉ The tablero will be completed by tightening the screws in "Photos 3 and 4." ◉ "Photos 1 and 5-10" show the completed product after assembly. ◉ Scale: Not included. ◉ Anti-slip: Not included. ◉ Cushion: Not included. This is an "easy-to-assemble tablero" that the buyer assembles. ◎ Finished size: Length 34 x Height 12 x Width 9 cm Distance between vertical boards: 30 cm Board thickness: 2 cm ◎ Scale, anti-slip, and cushion are not included. ◎ Shipping: It will be sent in the state shown in "Photo 2." ◎ Assembly: The buyer will assemble it. Assemble by tightening the four screws in "Photos 3 and 4." Since it has been disassembled after being assembled once, there are pilot holes, and reassembly can be done with a single Phillips screwdriver. ❶ There are "⚫️" marks on the vertical and horizontal boards, so assemble them with these marks facing each other. ❷ Align the marks on the two vertical boards with the horizontal board, and before screwing, make sure that the front/back and left/right/up/down are not reversed. ❸ Align the tips of the screws passed through the vertical boards with the screw holes in the horizontal board, and then tighten them. ❹ The assembled tablero is disassembled and shipped, so you can assemble it as described above. ❺ The "⚫️" marks will be hidden and invisible after assembly. ❻ If there is any wobbling, loosen the screws and adjust. ★★★★★★★★★★ ★ Finished Quality ★ ★★★★★★★★★★ ・ There may be scratches, color unevenness, knots, warping, and unevenness in the materials, as well as scratches, dirt, unevenness, gaps, cut misalignment, and adhesive unevenness from processing. ・ Commercially available Cemedine wood putty is used to repair dents, knots, and gaps in the boards. ・ Please consider purchasing with the understanding that this is handmade and does not have the same beautiful finish quality as manufactured products.