Operation confirmed. The box and instruction manual are not included. The SSID and password are listed on the back of the main unit. ■ This is an industry-leading thin* USB-powered 11ac 2x2 repeater that can be installed anywhere and uses a lamp to indicate the optimal installation location. *As of November 2018, among 11ac repeaters sold by Wi-Fi Alliance member companies. ■ This is a "wireless LAN repeater" that extends the radio wave of a wireless router to expand the range of use. ■ The product volume has been reduced by 72% compared to previous products. *Compared to WTC-1167HWH. ■ Connection is possible by simply pressing the WPS buttons on the Wi-Fi router (parent device) and this product. ■ The LED lamp on the front of the product indicates the installation location where radio waves can be relayed most efficiently. Simply plug it into a USB power adapter, and it will indicate red if it is too close to the router (radio waves are too strong), green if it is in the optimal location, and blinking green and red if it is too far away, making it easy to set up without an app. ■ In verification using this product, the communication speed has been improved by 3 times in actual measurements. *5GHz communication speed when a 11ac 2x2 Wi-Fi router is installed on the 1st floor and this product is installed on the 2nd floor of a wooden 3-story house, and communication is performed from the 1st floor to the 3rd floor. ■ It supports high-speed communication of 867Mbps in the 5GHz band (11ac/n/a), which is resistant to radio wave interference, and 300Mbps in the 2.4GHz band (11n/g/b), which is a general communication band. (Standard value) ■ Equipped with a band steering function, it automatically selects and connects to a more comfortable band (5GHz/2.4GHz band). ■ It is a movable USB type that rotates 180 degrees, and can be adjusted to a direction that is less susceptible to radio wave interference. *USB power adapter is not included. A USB power adapter with an output of 5V1A or more is required to connect this product to a household outlet. ■ It also has a safety function to prevent excessive heat generation. ■ With "Beamforming Z," which concentrates radio wave transmission, compatible devices such as iPhone XS and XR can connect comfortably even from a distance. ■ Supervised by DX Antenna, it is equipped with independent ultra-high sensitivity built-in antennas (2x2) in the 5GHz band and 2.4GHz band, which are resistant to noise. ■ Equipped with MU-MIMO function that can send separate data to multiple devices, up to 2 simultaneous communications and processing are possible if the device supports MU-MIMO.