Tamiya Midnight Pumpkin and Lunch Box front arm kit. ☆ Designed for easy installation on stock vehicles without modification. (Installation on custom vehicles is at the buyer's discretion.) The front track width will be slightly wider. ☆ Recommended for those confident in assembly and deburring, as these tasks are required. ☆ The product includes only the resin parts (without deburring). Please prepare the necessary screws and other mounting hardware. Regarding the last photo: 〇 Front arm holes: φ3MM drill has been passed through (let me know if you don't need this). 〇 Front arm, red parts: Please file these areas to be rounded for smooth movement. 〇 Upright, red parts: If the inner part of the wheel bearing area interferes, please trim it. There may be some insufficient explanations, so please ask any questions you may have. Strength and durability have been tested with a full stock setup (stock motor). It has withstood park driving and general use. (However, the arm will break if it directly hits a metal pillar at full speed.) Simple finishing, deburring, and adjustments are the responsibility of the buyer. While the product is made with increased strength, please be careful not to overtighten screws, which could strip the holes. This is a handmade product, so it is not as high quality as store-bought items. Please consider purchasing if you are okay with this. Due to the handmade nature, there may be some minor variations and imperfections. Thank you for your understanding.