~Included Parts & Specs~ Cable Used: 8GA Conductor Strands: OFC oxygen-free copper, fine copper wire with a purity of 99.99% or higher x special tin-plated wire Conductor Diameter: 8sq Vehicle Type: DBA-L375S (NA) only Cable Color: Purple Earthing Terminals: Terminals with 6mm holes at each end (7 locations total) Accessories: Tie wraps, M6 serrated NT for BT installation ●Example Installation Method ※See Image● Remove the cover, it comes off easily as it's held by two points. Connect A, B, and C to the mounting screw holes (M6) of each ignition coil (3 locations) and the original tightening point. Connect A to E (metal bracket of power steering oil) to the screw hole (M6) and the original tightening point (optional). Connect C to D (battery negative terminal). ※The mounting screw holes for the ignition coil are the metal parts of the screw holes (M6) for A, B, and C. Make sure the terminals touch the metal, and be sure to remove any dirt, oil, or paint from the bolts, and tighten them to the specified torque with the existing bolts. Caution: When installing, be careful not to interfere with the removed air cleaner cover, heat shield cover, etc. Disconnect the power connectors of each coil before working. ※Since you will be touching the ignition coil bolts during installation, if you lack the knowledge, we recommend that you ask a professional. The installation procedure may vary depending on the individual vehicle, and in rare cases, installation may not be possible. Be sure to check your own vehicle. ※The ignition coil is the rod-shaped coil on top of the spark plug that can be easily removed by pulling. The spark plug is located under the coil. Reference: You can search for various information by googling "ignition coil earthing". Please use it as a reference (^^) Effect: Although there are individual differences, fuel efficiency will definitely improve and responsiveness will be enhanced (^^) This product is exclusively for DAIHATSU Tanto DBA-L375S series (NA). If you want a Turbo version, the routing is different from the NA, so you can check your own vehicle and have it made to your desired length. We also accept custom orders. Please feel free to contact us. Although it is new and unused, there are no instructions or packaging. It will be shipped in simple packaging. We do not accept price negotiations. No shipping on weekends and holidays. Shipping period will follow the app. #Earthing #IgnitionEarthing