PC Body ⇒ This Item ⇒ VGA Cable ⇒ Compatible Display This cable converts the digital RGB (TTL 5V) of the X1 to analog RGB (0.7V). 640×200 Horizontal Sync Frequency 15.7kHz 640×400 Horizontal Sync Frequency 24.8kHz This is used between the general-purpose VGA terminal cable coming from the display and the PC body. Therefore, the mini D-sub 15-pin terminal is female. [[Compatible Models]] Sharp X1/X1 turbo with DIN6 pin and a digital RGB output terminal. [[Compatible Displays]] Mini D-sub 15-pin 3-row terminal (commonly called a VGA terminal) that supports the above horizontal sync frequencies emitted by the PC body. (There seems to be a lot of information on the internet, such as those that can be displayed but require adjustment on the display side.) Please find a combination that matches the PC body and display compatibility and compatibility on your own. Type: Short version, no female screws Shipping: Free Shipping: Yu-packet Post mini Shipping Notification: We will notify you of the shipment with the system's shipping date and time notification. Immediate shipment upon payment No need for greetings or payment notifications. Returns are possible, but the buyer is responsible for the return shipping costs. Details: The RGB and sync frequency GND grounds are separated into different systems, but there are no complex circuits, only wiring and resistors. (Connect 2 each of the 9 wires to each GND. 2+2=4 wires) Since the resistors are somewhat air-wired, the entire connection is fixed with a glue gun. We have made efforts to improve durability, but it is a standard, simple design with only resistors connected to RGB, so it does not support the "horizontal blanking problem" where the display colors of the X1 are different in some software.