Thank you for viewing! The design has been changed to include a hole for passing the DC cable. Made with a 3D printer. By sandwiching the K.E.S KIP-001 with an adapter, it can be fixed to the effector board with Velcro at a height of 20mm. It is possible to pass the DC cable through the hole and wire it. You can fix it to the effector board without sticking Velcro to the main unit. If the side dimensions are 80x25mm, it may be possible to use it with other items, but please check the dimensions of each part before considering. Set Contents ・Adapter left and right set x 1 set ※Effector unit, Velcro, etc. are not included. Material: PLA Color: Black How to use 1. Stick Velcro to the bottom of the adapter. 2. Sandwich the item 3. Install on the effector board The product may have burrs, layer marks, stringing, chips, and traces of support material removal. Please be aware of this. If you would like multiple items, please contact us. We will offer a slight discount only for multiple purchases. Shipping will be in simple packaging. Please purchase after understanding to avoid trouble. If you have no questions, you can purchase immediately. Thank you. #Power supply #Power supply #Effector board #Velcro