This is a smoked emblem made by attaching a 50 Prius pre-collision system hybrid emblem to the base for attaching the front emblem of a 30 Prius. It is fixed to the base with double-sided tape and adhesive for vehicles. I think it can be installed on 30 Prius, Prius Alpha, and 50 Camry vehicles without the pre-collision system, but please determine whether it can be installed based on the part number, size, and tab position on the back of the mounting base. It cannot be installed on 50 Prius and Prius Alpha (late model). The size is approximately 11cm in length and 16cm in width. The tabs on the back are not broken. Surface treatment is done with an adhesion promoter. In the prototype, it did not come off even when tape was applied and peeled off, or when air was blown on it. It came off when scraped with a coin, so it should not come off during normal use. The painting is done in a dedicated booth, but there may be fine dust particles. Please refrain from purchasing if you are looking for perfection. Instant purchase OK, unused after processing. Please do not install it on vehicles with the pre-collision system as it is a processed product. Thank you for your understanding of used processed products. Toyota Genuine Prius Emblem Prius α Emblem Camry Emblem SAI Emblem Pre-Collision Safety Emblem Millimeter Wave Radar GR Emblem Color: Black Type: Emblem Compatible Car Manufacturer: Toyota