Custom-made pickguard for an Ibanez AZES31. It's a single-pickup configuration for the front position only. It was made for a slightly smaller pickup (bartolini 3X) than a standard single-coil pickup cover, so some modification may be necessary depending on the pickup you use. There is a noticeable scratch near the pickup mounting hole (see photo 3). In addition, there are several small playing scratches. Aluminum tape is applied to the back (it's messy...). If you don't need it, please remove it with a sticker remover or similar. It will be protected with cardboard and sent in an envelope. Shipping is often on weekends and holidays, so you may have to wait a bit depending on the day of purchase, but please understand. Please purchase with the understanding that this is a used item.