Dear Mr. En, It seems you left a comment earlier, but due to a problem with my device, I deleted the previous page and can no longer view it. I apologize. If you have any questions, please do not hesitate to ask again. Updated 11/02 19:20 Recently, I have started selling on another site, so although extremely rare, there is a possibility of simultaneous purchases. In that case, I will prioritize the first person to purchase, and the later purchase will be canceled. Thank you for your understanding. Negotiations for price reductions are not accepted. I previously cut out the figured maple wood I purchased and combined it with Japanese-made metal fittings to create a mechanical pencil and a ballpoint pen. The fittings I usually make are foreign-made, but the Japanese-made ones have a solid click feel. Also, since the knock parts are on the clip side, you can easily convert it to a mechanical pencil by replacing it with the mechanical pencil mechanism made by Kato Metal. The size is approximately 140mm in total length, approximately 10mm for the pen tip, approximately 13mm for the maximum diameter, and tapers down to approximately 10mm on the clip side. The weight is approximately 22g. Also, the metal fittings are for photography purposes, so they may be scratched, bent, or not properly inserted, but I will press in new metal fittings and ship them at the time of shipment. Please view it as an assembly image. Made November 02, 2024