MS Flex Step-Up and Bumper Cut Processing Jig. The step-up is 1.5mm for both front and rear. Engravings have been added for identification. Please check the top image for the engravings. Personally, I believe there are the following issues: ・Accuracy of processing is not as good (compared to milling) However, the results of processing using this jig have sufficient accuracy, in my opinion. However, please understand that the accuracy cannot be equal to that of milling due to the structure. ・Strength is reduced Especially on the front side, there is a possibility of breakage due to impact even with a 1.5mm step-up. (I have broken it many times) Cutting diagonally significantly reduces strength. (Milling allows for horizontal cuts, making it less advantageous in terms of strength) As a countermeasure, reinforcement such as applying a carbon plate on the inside is necessary. *If reinforcing before processing, please ensure that the carbon plate and adhesive do not come into contact with the processing area, as this may make processing difficult. Considering the issues, I believe this jig is useful for the following people: ・Those who want to step up easily and inexpensively ・Those whose speed range is not yet very high ・Those who understand strength and reinforcement Contents This is a set of the following 3 items. The price is the price when sold separately. (If you purchase 3 or more items, the shipping fee of 200 yen will be waived) ・Bumper cut and notch jig 600 yen ・Front step-up jig 400 yen ・Rear step-up jig 400 yen How to use ・Please refer to the photos Notes ・Please use "Tamiya Thin Blade Craft Saw 74024" for the craft saw. ・To minimize the reduction in strength, it is manufactured with the tightest dimensions. Please make adjustments and finishing with a cutter, file, etc. ※As a standard, please be aware of the following points. This product is produced with a 3D printer. Please purchase only if you understand the unique layer lines, production by individual handwork, discoloration during layering, etc. We are not responsible for any damages caused by using this product. Please purchase from the following: #nonbiry_lab Search tags #Mini4WD #MS #ms #MSFlex #msFlex #Jig #ProcessingJig