■ A-curve ■ 250KΩ ■ Split shaft ■ Inch size ■ Custom CTS POT ↓ Special silver alloy material is used on both ends of the carbon resistor. This eliminates the sound leakage at volume 0, which is the biggest problem with the standard CTS pots. This phenomenon of sound leakage occurs because the residual resistance inside the pot is large, but the "CUSTOM CTS POT" reduces the residual resistance, which was normally around 20Ω on average, to 4Ω or less. Furthermore, as an effect of this special material, it eliminates the muddiness of the sound when the volume is turned down, and at full volume, it functions as if it were a "volume-through," successfully maximizing the performance of the pickup. Solid brass, which has been confirmed to improve sound quality, is used for the shaft, and the bottom part incorporates the "flat-back style" seen in 50's Gibson guitars. The torque has also been set to a moderate weight by changing the internal grease. If you require multiple pieces, please refer to the prices below. If you send a message, I will create a dedicated listing. Thank you very much. 1 piece) 1235 yen 2 pieces) 2285 yen 3 pieces) 3335 yen 4 pieces) 4385 yen 5 pieces) 5435 yen 6 pieces) 6485 yen 7 pieces) 7535 yen 8 pieces) 8585 yen ↓ Guitar making related #TONEWOODSHOP ↓ Electronic parts #TONEWOODSHOP Electronic Parts ↓ Potentiometers #TONEWOODSHOP Pots